PMI Eagle 220, Руководство пользователя

Страница: 34 / 96

Connecting the Eagle™
••••
26
Communication Port Connections
Installing the Recorder
A round, 4-pin communications port has been included in the
design of the Eagle power quality recorder. The included
communications cable is an USB 4-pin female to Type A cable
used to interface with a laptop or desktop PC. This
communications port allows you to communicate with the Eagle
and access its recorded data.
USB Communications Cable
The USB communications cable is configured and wired to
conform to the industry standards for USB communication.
Important: To maintain operator safety, do not connect the USB
cable to the recorder’s communications port while the unit is
powered from the voltage input banana jacks, as the
communications cable is not rated for 600V CAT III installation.
Connect the 4-pin connector of the communications cable to your
Eagle and the USB Type A end of the cable to your computer’s
USB port.
You can now use either ProVision or WinScan to download data
and set up the Eagle to record. Please refer to the ProVision and
WinScan manuals for instructions.