Manual Reset to Factory Defaults
76
Manual Reset to Factory Defaults
A manual reset to factory default can be useful to
recover from a lost admin password or from any sit-
uation that prevents using the normal web browser
administration, such as accidentally entering an
unworkable network configuration.
1
Connect a
null modem
cable between the
WallNet’s RS232 serial port and a serial port
on a computer.
2
Start a terminal program on your computer,
such as HyperTerminal, and open that serial
port at 9600, 8N1, no flow control.
3
Remove power from the WallNet.
4
Press and hold the recessed ADM button
with a straightened paper clip or other small
tool. You will feel it click.
5
While holding the ADM button in, apply
power to the WallNet.
6
When you see text appearing in the
terminal program, you may release the ADM
button.
7
When the boot completes and the
messages stop, you will see a root
command prompt.
8
At the root command prompt, type
factory
and press [Enter]. You will see:
[root@(none) /]# factory
Resetting to factory default
settings.
You must reboot to return to
factory initial state.
[root@(none) /]#
ADM button is
accessed via
this hole.
Содержание Wallnet
