Planar Wallnet, Настройка и эксплуатация

Страница: 73 / 88

67
RS232 Setup
After the buttons are programmed, anyone with
View access can use them from Custom
Commands at the top of the left menu. When the
buttons are used from there, none of the ASCII
command text is shown to the viewer, unless the
View command output box is checked.
In the menu area, select Save WallNet Config after
programming the buttons. Click
Save
configuration settings now .
RS232 Setup
WallNet does not know what displays it is
connected to. This is where you tell it. Do not use
wildcards, such as ** and 0*. They won’t work and
won’t be saved in the list. Read the detailed
instructions on the web page for more
information or see "Set Display IDs in the
Displays" on page 27.
Asset Tag
Asset Tag allows you to change text in the
displays. It can be used to identify displays with
your company’s property number, describe the
position in a wall of each display, or store the
serial number of the display.
✎
Be warned that the Asset Tag text is stored in the
control board
of each display. If the control board is
changed for a new one, or swapped with another
module or board in the wall, the Asset Tag text goes
with it.
WallNet Admin
You need Admin authority to do anything here.
All of the items under this heading are explained
in "Connecting With DHCP" and "Connecting
With No DHCP".