Loading the Software into WallNet
30
Note:
WallNet software file names end with the
.wn
extension.
Loading the Software into WallNet
1
In your browser, click the
Back
button until
you return to the WallNet page.
2
In the menu area of the WallNet page, select
WallNet Software. In the main area, scroll
down to the Load WallNet Software section
and follow the directions. Return to step 3 of
this section to continue. Loading new
software takes one to two minutes.
3
In the menu area, select Reboot WallNet,
and then click
Reboot WallNet now
. This
takes about 90 seconds.
Miscellaneous Configuration
The following sections refer to miscellaneous
options that can be set up on the WallNet
Software page.
Reset to Factory Default
Use this to reset ALL settings to the factory
default. This includes network settings, date and
time, etc., as well as display settings like RS232
IDs and email report and alert options.
Caution:
Using this option will reset all of your
configurations and reboot the WallNet hardware.
Because this includes network settings, be aware
that the WallNet may not configure to the same
network address after the system reboots.
When you click
Reset ALL to Factory Default
,
you receive the Confirm Factory Reset page. Click
OK
if you are sure you want to reset ALL settings
to the factory default.
Содержание Wallnet
