Planar Wallnet, Настройка и эксплуатация, Страница: 23 / 88

17
Connecting to WallNet
3 After a minute or so, the CPU light will start
blinking: on one second, off one second.
Count at least 30 seconds (15 times LED is
on).
4 Connect WallNet to the network.
5 Connect your computer (with the known IP
address) to the same network. DO NOT
connect the computer and WallNet directly
to each other, unless you are using a
crossover cable. They can only
communicate over a correctly configured
network.
6 Do one of the following:
• Using the WallNet Assistant program, click
the Route Add Cmd button to
automatically run the route add
command.
• Type this on one line exactly as shown
(except substitute your PC’s IP address)
1
:
route add 192.168.12.0
mask 255.255.255.0 <PC IP
address>
7 Press [Enter]. This action tells the network
that your computer can point to this
WallNet, but so far, yours is the only
computer that can.
8 Start your browser and point to:
http://192.168.12.12
2
1. 192.168.12.0 is a network address.
2. 192.168.12.12 is the default address of the WallNet.