65
4.11.2. Software Updating by means of MC-088 Removable Module
The IT-088 features function of saving the instrument software into the storage element
of the MC-088 Removable Module. The software update starts automatically after power
on in case the installed software is not compatible with this Removable Module or if the
software on the Base Unit is of an earlier version. If the Base Unit has been operating with
a Removable Module other than MC-088, then after installation of the MC-088 and
switching the power on, IT-088 software will automatically begin to download. The
Analyzer will indicate the loading of the software by flashing screen backlight. After the
software has been loaded, the Analyzer switches to the normal operating mode. If the
mode of updating from the PC (see section 4.11.1) was enabled prior to switching the
power of the instrument on, then the software will continue loading from the PC.
4.11.3. Removable Module Software Memory Manager
Removable Module Software Memory Manager performs saving of the current software
onto the Removable Module and later tests its accuracy.
icon in the main menu
corresponds to this function. The function menu can be seen in Figure 4.58:
Figure 4.58
Upon selection of
«Memory Manager»
function, the Analyzer will be checking the
software condition for approximately 15 seconds.
Pressing of any button during this time will lead to abortion from the testing process.
After the test has been completed, the software identification data will be displayed on the
screen:
а
)
Memory:
Removable Module type. If no Removable Module is used,
«no»
will be
displayed.
b)
Program:
software test results. If the test result is positive,
«normal»
will be
displayed. If an error has been detected,
«error»
message will be displayed. If no software
has been detected,
«no»
will be displayed.
c)
Date:
the date when the software was saved;
d)
Version:
software version.
To save the current software into Removable Module memory, press
«F1»
key (
Save
command). The software will download into the Removable Module memory from the Base
Unit. The process will be shown on the screen as a progress indicator. It is recommended
to save the program into the MC-088 memory after you have updated the software from
PC. After the software has been saved, it is automatically tested for accuracy.
If you try to save the version of software, which is older than the current one or if it is not
compatible with the Removable Module, the warning message will appear prior to saving.
You can choose to abort or continue the process.
Содержание IT-088
Страница 1: ...IT 088 DIGITAL DVB T SIGNAL ANALYZER OPERATING MANUAL...
Страница 2: ...2 31 03 10...
Страница 82: ...82...