Additional Configuration Options on Windows NT | 63
3.
Set the start time in the Starting at: field.
Use a 24-hour time format, such as 16:30 to indicate 4:30
P
.
M
.
This determines if or when power-off mode is invoked for up
to four different periods of the day.
4.
Input the number of minutes of additional inactivity
(after the first screen saver displays) that must elapse
before the flat panel enters power-off mode in the
Invoke DPMS after:
field.
5.
If desired, select Wake at start of period to force the flat
panel to wake up if it is in power-off mode at the start of
the period.
6.
If desired, select Never sleep during this period to prevent
a switch to power-off mode during the period.
7.
Click OK to keep your settings, or Cancel to discard them.
The Display Properties dialog box appears.
8.
Click OK.
Leave the start time for a period blank if you don’t want
to use it.
Содержание DOME Md5/DFP
