Planar DOME Md5/DFP, Руководство по установке

Страница: 99 / 112

Configuring the Windowing Environment | 87
Configuring the Windowing Environment
Once you have set the display mode, you can configure your
system to run either the OpenWindows or CDE windowing
environment.
Running OpenWindows
For a one-headed system, type:
openwin -dev /dev/md5dfp0.0
For a two-headed system, type:
openwin -dev /dev/md5dfp0.0 -dev /dev/md5dfp0.1
Each screen has a name of this form:
/dev/md5dfpy.z
where
y
= board instance
z
= head number (0 for first head, 1 for second head)
For more information on
openwin
, refer to your
Sun OpenWindows documentation.
If you are using two heads for each Md5/DFP board, both heads
must have the same resolution.
Board instances are assigned by the system.