Planar DOME Md5/DFP, Руководство по установке

Страница: 94 / 112

82 | Installing the Board and Driver in a Sun PCI Workstation
res="1536x2048 Panel"
This line indicates that your flat panel’s resolution (pre-adjusted
timing name) is "1536x2048 Panel".
monitor="domegray.vda"
This line indicates that you are using a grayscale display and
that the pre-adjusted timing name is located in the display file
domegray.vda
.
Display files are located in the
/opt/DOMEmd5dfp/monitors
directory. Do not modify these files unless DOME Support advises
you to do so.
board="md5dfp-2hd.xqa"
This line indicates that you are using two heads (
-2hd
) of an
Md5/DFP board (
md5dfp
), and that the configuration of the
board is located in the board file
md5dfp-2hd.xqa
.
Board files are located in the
/opt/DOMEmd5dfp/boards
directory. Do not modify these files.
See the second code sample on page 80 for configuration of
the second head.
When you modify this line, use the exact name for your
display from the “Pre-Adjusted Timing Name” column in the
Resolutions table on page 95. If you are supporting two flat
panels with one Md5/DFP board, both heads must support
the same resolution.
To support a color display, use
"domecolr.vda"
in place of
"domegray.vda"
.
Both heads of the same board must use the same
display resolution.