88 | Installing the Board and Driver in a Sun PCI Workstation
Configuring the Common Desktop Environment
If you select CDE as your windowing environment, use the
instructions below to configure it for your Md5/DFP board.
CDE defaults to using a single framebuffer associated
with
/dev/fb
,
the boot console. To change the startup
configuration, copy the
/usr/dt/config/Xservers
file
to
/etc/dt/config/Xservers
,
and edit it there.
This file contains mostly comments, but the last line is the
command line used to start the X server and bring up CDE.
This is the default line:
:0 Local local_uid@console root /usr/openwin/bin/Xsun \
:0 -nobanner
To use one or more DOME devices
Replace the second
:0
with the
-dev
option flag and the
appropriate device parameter.
For example, to use both heads of an Md5/DFP board, change
the line to this:
:0 Local local_uid@console root /usr/openwin/bin/Xsun \
-dev /dev/md5dfp0.0 -dev /dev/md5dfp0.1 -nobanner
If you need to use a different default visual class, add the
appropriate
defclass
option for each
-dev
option.
See “Using visual classes” on page 83.
To use a DOME device with a Sun console
Change the line to this:
0 Local local_uid@console root /usr/openwin/bin/Xsun \
-dev /dev/fb -dev /dev/md5dfp0.0 -nobanner
Содержание DOME Md5/DFP
