Planar DOME Md5/DFP, Руководство по установке

Страница: 37 / 112

Configuring Display Settings on Windows 2000 | 25
Configuring Display Settings on Windows 2000
After you install the board and driver and set the default display
(see table below), you can change the resolution or any other
configuration option.
Determining screen assignments
Click Identify in the Settings tab to match screens to boards.
Using the DOME tab to change display properties
You can change the display properties, such as resolution,
palette options, and brightness, using the DOME tab after
the display is attached to the Windows 2000 desktop.
Use this tab... To set the default display for...
DOME tab Displays attached to the
Windows 2000 desktop
Properties ->
Settings tab Displays not attached to the
Windows 2000 desktop
The Windows 2000 operating system renumbers and reassigns
screens as you add them to the configuration. Set resolutions
or preferences only after all boards and screens are installed.
Restart your system to make sure the screen assignments
are stable.