PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
36
OGU 930500275-A1
Quick Setup Section
6.
No Internet connection
FIGURE 1.
Quick Setup Panel
POINT-TO-POINT
PROTOCOL OVER
ETHERNET (PPPOE) OVER
ATM
To configure the Point-to-point protocol over Ethernet, follow these steps:
7.
Select 'Point-to-point protocol over Ethernet (PPPoE)' from the 'Connection
Type' combo-box.
8.
Your Internet Service Provider (ISP) should provide you with the Login user
name and Login password.
9.
If your board features a DSL connection, you will see an 'Automatic PVC
Scan' check box. Select this check box to enable the automatic configuration
of the VPI, VCI and encapsulation parameters (relevant to DSL connec-
tions).
ETHERNET (PPPOE) OVER
PTM
To configure the Point-to-point protocol over Ethernet, follow these steps: