© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Quick Setup Section
OGU 930500275-A1
35
Q
u
ic
k
S
e
tu
p
S
e
c
ti
o
n
Quick Setup
Section
This chapter will describe the
Quick Setup Section
accessible from the
Home
Page
of the
PRG AV4202N
upon user authentication to the Router.
Be aware that any configuration changes could compromise your connectivity.
When subscribing to a broadband service, you should be aware of the method
by which you are connected to the Internet. Your physical WAN device can be
either Ethernet, DSL, or both. Technical information regarding the properties of
your Internet connection should be provided by your Internet Service Provider
(ISP). For example, your ISP should inform you whether you are connected to
the Internet using a static or dynamic IP address, or what protocols, such as
PPTP or PPPoE, you will be using to communicate over the Internet.
The Router will automatically recognize if you have more than one physical
WAN device on your gateway, and will provide a configuration section for each,
under the 'Internet Connections' section of the 'Quick Setup' screen.
Your WAN connection(s) can be configured using one of the following methods.
Read the configuration instructions relevant to you, by selecting your connection
method from the list below:
1.
Point-to-point protocol over Ethernet (PPPoE) over ATM
2.
Point-to-point protocol over Ethernet (PPPoE) over PTM
3.
Point-to-point protocol over ATM (PPPoA)
4.
Routed Ethernet Connection over ATM (ETHoA)
5.
Bridged Ethernet Connection over ATM (ETHoA)