PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
128
OGU 930500275-A1
Advanced Section
RESTORE DEFAULTS
You may sometimes wish to restore the Router's factory default settings. This
may happen, for example, when you wish to build a new network from the be-
ginning, or when you cannot recall changes made to the network and wish to go
back to the default configuration.
To restore default settings:
1.
Click the 'Restore Defaults' icon in the 'Advanced' screen of the Web-based
Management. The 'Restore Defaults' screen will appear
2.
Press 'OK' to restore Discus’ factory default settings.
FIGURE 29.
Restore Defaults Panel
ROUTING
Access the Router's routing settings by clicking the 'Routing' icon from the 'Ad-
vanced' screen. The basic 'Routing' screen will appear. Press the 'Advanced'
button to view the full routing settings.
Routing Table.
You can add, edit and delete routing rules from the routing table. Click the New
Route link. The 'Route Settings' screen will appear. When adding a routing rule,
you need to specify the following:
Name
: Select the network device.
Destination
: The destination is the destination host, subnet address, network
address, or default route. The destination for a default route is 0.0.0.0.
Netmask
: The network mask is used in conjunction with the destination to de-
termine when a route is used.
Gateway
: Enter the gateway's IP address.