PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Hardware Installation
OGU 930500275-A1
15
3.
The setup software will invite you to plug the other end of the USB cable into
the USB port on the rear of the Router
MAC 10.x
1.
Connect one end of the USB cable into the USB port of your PC
2.
Connect the other end of the USB cable into the USB port on the rear of the
Router. The Operating System will automatically recognize the device
FIGURE 4.
USB Cable Connection
Don’t plug the other end of the USB cable until setup software will ask you to do it.
In the case your provider will supply to you a SIP account, it will be needed to
properly connect the FXS and FXO ports. In detail you must follow these steps:
1.
Connect one end of the first phone cable into the DSL filter port identified
with a computer symbol
2.
Connect the other end of the first phone cable into the DSL port of the
Router