PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Hardware Installation
OGU 930500275-A1
13
POWERING UP THE
ROUTER
To power up the Router:
1.
Plug the power adapter into the power adapter port located on the rear of
the Router
2.
Plug the power adapter into a standard electrical wall socket
3.
Press the Power button located on the rear panel of the Router
4.
Wait for the power LED to turn steady green
CONNECTING THE
ROUTER
The first step to install the router is to physically connect it to the telephone
socket and then to connect it to a computer by means of an Ethernet or an USB
connection.
To connect the phone cable:
1.
Connect one end of the phone cable into the DSL filter port identified with a
computer symbol
2.
Connect the other end of the phone cable into the DSL port on the rear of
the Router
FIGURE 2.
Phone Cable Connection
To connect the Ethernet cable: