PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Advanced Section
OGU 930500275-A1
109
DATE AND TIME
To configure date, time and daylight savings time settings perform the following:
1.
Click the 'Date and Time' icon in the 'Advanced' screen of the Web-based
Management. The 'Date & Time' settings screen will be displayed
2.
Select the local time zone from the pull-down menu. The Router can auto-
matically detect daylight saving setting for selected time zones. If the day-
light saving settings for your time zone are not automatically detected, the
following fields will be displayed:
- Enabled. Select this check box to enable daylight saving time.
- Start. Date and time when daylight saving starts.
- End. Date and time when daylight saving ends.
- Offset. Daylight saving time offset.
3.
If you want the gateway to perform an automatic time update, perform the
following:
Select the 'Enabled' check-box under the 'Automatic Time Update' section.
Select the protocol to be used to perform the time update by selecting wither
the 'Time of Day' or 'Network Time Protocol' radio button.
Specify how often to perform the update in the 'Update Every' field.
You can define time server addresses by pressing the 'New Entry' link on the
bottom of the 'Automatic Time Update' section.