PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
20
OGU 930500275-A1
Setting Up Your Computer
ETHERNET CONNECTION
In case you already established a connection with your Router a first time
and/or you do need to set up manually a connection to your Router, please fol-
low the instructions described in this chapter. You will be guided to set up an
Ethernet connection to the Router. To do so, first you have to verify the exis-
tence of a TCP/IP protocol stack and, then, according to your Operating Sys-
tem, to establish an Ethernet connection to it. This connection will require you to
enable your computer to receive from the Router its own IP Address automati-
cally: in such a case, the Router acts like the DHCP server in your local net-
work.
ETHERNET CONNECTION
>> TCP/IP PROTOCOL
INSTALLATION
This procedure requires the TCP/IP protocol installed on your computer. Refer
to the following chapters and to your Microsoft® Windows or Apple® MacOS
10.x operating systems manuals.
Microsoft® Windows 98SE, ME, 2000
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel -> Network Control Panel
,
make a double click on the
Network
icon
3.
Select
Configuration -> TCP/IP
and then click on the
Add
button
4.
Select Protocols, click on
Add
button and choose Microsoft TCP/IP. Then
click on the
OK
button
5.
After the computer reboots, you're ready to configure the TCP/IP settings
Configure the Network adapter to obtain automatically an IP address
Microsoft® Windows XP
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel
make a double click on the
Network
icon.
3.
Select
Protocol
and click on the
Add
button. Select
Microsoft
and
TCP/IP
,
then click on the
OK
button.
4.
Configure the Network adapter to obtain automatically an IP address.
Apple® MacOS 10.x
TCP/IP is installed on a MacOS system as part of Open Transport.
ETHERNET CONNECTION
>> MS WINDOWS 98SE, ME,
2000
To configure TCP/IP on these Operating Systems follow these steps:
1.
Select
Start -> Settings -> Control Panel
and make a double click on the
Network
icon.