115
PDP-433CMX
5
6
7
8
5
6
7
8
C
D
F
A
B
E
Command
Function
GAJ
Outputting data for electronic-control-adjustment values and drive-system-adjustment values
GPW
Outputting data related to the white-balance adjustment for the panel
GS1
Outputting data such as version information, and data from the hour meter and pulse meter
GS2
Outputting data for power down, temperature and condensation information
GAS
Outputting data related to the picture quality setting of SLOT
GAR
Outputting data related to the picture quality (RGB1 of the Factory menu)
GPS
Outputting data related to SCREEN adjustment data
GPD
Outputting data on PD information of Service Factory menu (past eight times)
GWB
Outputting data related to picture quality / white balance
GSD
Outputting TxD data on SD information of Service Factory menu
GSS
Outputting data on SETUP items of menu mode / Integrator menu
GSO
Outputting data on OPTION items of menu mode / Integrator menu
Order
Data Contents
Size
Remarks
1
Setting mode of electric power upper limit value
3 byte
AB* ( *: 0 to 3)
2
Electric power upper limit value
(ABL)
(Reference data)
3 byte
3
(Offset data)
3 byte
(Note 1)
4
Vsus adjustment value
(Reference data)
3 byte
5
Vofs adjustment value
(Reference data)
3 byte
6
V-SUS-B adjustment value
(Reference data)
3 byte
7
V-SUS-G adjustment value
(Reference data)
3 byte
8
Y-SUS-B adjustment value
(Reference data)
3 byte
9
Y-SUS-G adjustment value
(Reference data)
3 byte
Order
Data Contents
Size
Remarks
1
Panel color temperature mode
3 byte
PT* ( *: 0 to 3)
2
Gain of W/B adjustment value
Red
(Reference data)
3 byte
3
(Offset data)
3 byte
(Note 1)
4
Gain of W/B adjustment value
Green
(Reference data)
3 byte
5
(Offset data)
3 byte
(Note 1)
6
Gain of W/B adjustment value
Blue
(Reference data)
3 byte
7
(Offset data)
3 byte
(Note 1)
8
Offset of W/B adjustment value
Red
(Reference data)
3 byte
9
(Offset data)
3 byte
(Note 1)
10
Offset of W/B adjustment value
Green
(Reference data)
3 byte
11
(Offset data)
3 byte
(Note 1)
12
Offset of W/B adjustment value
Blue
(Reference data)
3 byte
13
(Offset data)
3 byte
(Note 1)
GAJ:
Outputting data for electronic-control-adjustment values and drive-system-adjustment values
• Data are output according to the transmission order and size of the table below.
• This command is invalid in modes other than RS-232C Factory Adjustment mode.
GPW
(Get Panel White balance)
:
Outputting data related to the white-balance adjustment for the panel
• Data are output according to the transmission order and size of the table below.
• This command is invalid in modes other than the RS-232C Factory Adjustment mode.
(Note 1) : If data are output when the Reference mode is selected, the same data as the reference data are output as the offset data.
(Note 1) : If data are output when the Reference mode is selected, the same data as the reference data are output as the offset data.
Command Description
6.4.3 GET COMMAND
Содержание PDP 433CMX
