12
2
2
Connecting your equipment
Connecting using wireless LAN
Wireless connection to the network is possible through a
wireless LAN connection. Use the separately sold wireless
LAN converter (Pioneer Model No. AS-WL300) for connection.
Note
•
Use only the furnished accessory connecting cable.
•
For instructions on setting the wireless LAN converter, refer
to the operating instructions for the AS-WL300.
Connecting the other Pioneer devices and
controlling centrally
When a Pioneer Amplifier’s/CD player’s control terminal is
connected with this unit, the connected amplifier/CD player
can be operated with the Pioneer ControlApp.
Please see the following website for amplifiers/CD players
that are compatible with the Pioneer ControlApp.
http://pioneer.jp/support/soft/iapp_controlapp/en.html (for
iPhone/iPod touch)
http://pioneer.jp/support/soft/aapp_controlapp/en.html (for
Android)
You can also centrally control Pioneer products with control input
terminals using this unit’s remote sensor. Those devices that do
not have remote sensors or devices that are located where it
cannot receive signals can also be operated remotely (*1).
*1: Using the unit’s remote sensor, you can remotely operate
the devices connected to this unit with their remote
controllers.
Important
•
When connecting the control terminals, please make sure
that the audio cable (analog connection) that is included
with the unit is also connected. The connection using the
control terminals alone will not allow proper operation of
the central control.
Note
•
Use a commercially available cable with mono mini-plug
(with no resistance) for connection.
•
When connected, the remote sensor for the amp and CD
player will cease to function, and the remote sensor on this
unit will receive the signals for the amplifier/CD player.
Point the remote control towards this unit to operate.
•
When this unit’s network standby is set to off, this unit
cannot operate the amplifier or CD player. They can be
operated when the network standby for this unit is set to on.
DC 5V
WPS
Ethernet
LAN (10/100)
OPTICAL
COAXIAL
1
2
OPTICAL
COAXIAL
5V 1A
DC OUTPUT
For
(5V
0.6A MAX)
WIRELESS
LAN
iPod/iPhone
CONTROL
OUT
DIGITAL IN
DIGITAL IN
DIGITAL OUT
USB DAC
WAN
3
2
1
LAN
Wireless LAN
router
Modem
Internet
Wireless LAN converter (AS-WL300)
(commercially available)
Cable included with the
Wireless LAN converter
(AS-WL300)
IN
OUT
CONTROL
SOURCE
/I STANDBY/ON
STANDBY
iPod/iPhone
5V
1A
DIRECT
Hi-Bit 32
Up Sampling
SOURCE
NETWORK AUDIO PLAYER
N-50A
CONTROL
OUT
Control cable
(commercially available)
To the CONTROL IN terminal
of other Pioneer products
with control input terminal
Other Pioneer products with
control input terminal
