Additional information
17
148
En
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the recorder and an explanation
of their meaning.
Message
Explanation/Action
• Initializing disc. Please wait a moment.
When you load a blank DVD-RW or DVD+RW disc, the
recorder automatically initializes it.
• Incompatible region number.
The disc loaded has an incompatible region number for the
recorder and so will not play.
• Cannot record any more titles.
• No more space for file management data.
The disc control data limit has been reached, or the maximum
number of chapters and/or titles has been reached. Erase
titles/chapters or combine chapters.
• This disc cannot be recorded. Undo the finalization.
The disc was finalized on a non-Pioneer DVD recorder. Undo
the finalization in order to recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization successfully.
• Could not undo finalization successfully.
• Could not successfully unlock the disc.
The disc may be dirty or damaged. Take out the disc, clean it
and retry. If the error persists, use a new disc. If the error
appears even with a new disc, please consult a Pioneer
Service Center.
• Incompatible or unreadable disc.
The disc loaded is a playback-only disc type. This display
may also appear if the disc is dirty or damaged.
• Cannot record to a disc that is not CPRM compatible.
• Cannot record this content using Video mode recording.
• This video cannot be recorded to DVD+R/+RW.
The video source is copy-once protected. Use a VR mode
DVD-R/-RW disc with CPRM for recording.
• This content is copy protected.
The video source is copy-protected and cannot be recorded.
• Incorrect CPRM information.
The recorder could not read the CPRM information. The
recorder may be damaged—please consult a Pioneer
Service Center.
• Repairing disc.
• Repairing the HDD.
During recording, the power was cut. This display appears
when the power is restored.
• Could not repair the disc.
The recorder was unable to repair the disc after a power cut.
The contents of the recording will be lost.
• Overheating has stopped operation.
Press DISPLAY to clear message.
The internal temperature of the recorder has exceeded the
operating limit. If this message reappears, please contact a
Pioneer authorized service center.
• HDD optimization is recommended. This can be done
using Disc Setup.
The HDD should be optimized (basically, HDD housekeeping)
to maintain playback and recording performance.
• Please perform HDD optimization. This can be done
using Disc Setup.
The HDD is in more urgent need of optimization in order to
maintain performance.
• The HDD has not been sufficiently optimized. Please
optimize again.
If this message appears repeatedly after optimizing the HDD
it is likely that there is not enough free space on the HDD for
optimization to complete properly. Please erase some titles
from the HDD and optimize again.
Содержание DVR-545HX-S
Страница 18: ...18 En SX SW505HX S ST606 ...
Страница 38: ...38 En DVR 545HX S DVD Recorder ...
