The Initial Setup menu
16
138
En
Additional information about the TV system
settings
About the input line system
This recorder is compatible with PAL, SECAM, 3.58 NTSC
and PAL-60 TV systems. The Input Line System and Input
Colour System settings determine how the recorder
treats incoming video signals from an external input.
Please note the following points when changing the
input line system:
• When the current input is a built-in tuner channel
preset, changing the input line system will usually
also affect the input line system of the
AV2(INPUT 1/
DECODER)
input. However if the
AV2/L1 In
setting is
set to
Decoder
, then the L2 input is affected instead.
• If, when the Input Line System setting is changed, the
screen goes blank (due to incompatibility with your
TV), you can switch back by pressing and holding the
front panel
STOP
button then pressing
VIDEO IN
(also front panel) while the recorder is stopped.
• When you switch the Input Line System setting the
Copy List is erased. If you switch the setting using the
STOP
button and
VIDEO IN
buttons as described
above, there is no confirmation, so please use with
care.
• You can’t mix recordings of different TV line systems
on the same disc.
• When you change this setting, the
Input Colour
System
setting also changes (see below).
About NTSC on PAL TV
Depending on the Input Line System setting and the
NTSC on PAL TV setting, the signal format output when
the recorder is stopped varies as shown in the table
below.
Remote Control
Mode
Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same room, set them to
different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold
RETURN/EXIT
then press
1
,
2
or
3
to set. The
remote will only control a recorder with the same ID.
AV. Link
This Recorder Only
•
Signals received through the AV input when the recorder is in standby are
not passed through to the AV output.
Pass Through
Signals received when in standby are passed though to the output for
connected devices. (Note that during EPG data download, the EPG data is
not passed through.)
When set to
Pass Through
, make sure to set Power Save (page 129) to
Off
.
DivX VOD
Registration Code
Use to display the recorder’s DivX registration code. See
DivX video com-
patibility
on page 43 and
DivX® VOD content
on page 43.
Set Preview
(HDD only)
Quick Preview •
When in the Disc Navigator, the thumbnail video plays short excerpts from
throughout the selected title. (Note that edited titles that will play normally
from the beginning.)
Normal
The thumbnail video plays from the beginning of the title.
CI Information
Next Screen
This option displays a menu of CI card functions. Consult your service
provider for more information on the functions available.
Software Update
Next Screen
The Software Update function can check for and download updated system
software for the digital tuner. See
Using Software Update (Digital tuner)
on
page 139.
Setting
Options
Explanation
Input Line System
NTSC on PAL
TV
Output when
stopped
625 System
Off
PAL
On
PAL
525 System
Off
NTSC
On
PAL–60
Содержание DVR-545HX-S
Страница 18: ...18 En SX SW505HX S ST606 ...
Страница 38: ...38 En DVR 545HX S DVD Recorder ...
