Pioneer DVR-545HX-S, Руководство по эксплуатации

Страница: 147 / 156

Additional information 17
147
En
HDMI
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
Problem Remedy
The connected HDMI or DVI
device does not display any pic-
ture (and the front panel HDMI
indicator does not light) • Try disconnecting then reconnecting the HDMI cable (while the power of both
components is on).
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next, switch on the HDMI/
DVI device and leave it for around 30 seconds, then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the following:
– The connected device’s video input is set correctly for this unit.
– The cable you’re using is fully HDMI-compliant. Using a non-standard cable may
result in no picture being output.
– Don’t use several HDMI cables connected together. Use a single cable to connect
devices together.
• When you connect a DVI-compatible device make sure of the following:
– The connected device’s video input is set correctly for this unit.
– The DVI terminal on the connected device is HDCP-compatible.
– The connected device is compatible with NTSC (720 x 480i/p, 1280 x 720p, 1920 x
1080i) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i) video input.
• If the HDD is damaged or broken, there will be no HDMI output.
• Not all HDCP-compatible DVI devices will work with this recorder.
No video from the HDMI output. If you choose a setting that is incompatible with your TV you may not be able to see
any picture at all. In this case, press
ONE TOUCH COPY while holding down the
( STOP ) button on the front panel to switch the setting (this also switches
Component
Video Out on page 132 to the default setting).
There’s no sound from the con-
nected HDMI or DVI device. • There is no sound when using a DVI terminal.
• Some HDMI-compatible devices do not output sound (check with the manual that
came with the connected device).