Pioneer DVR-530H-AV, Инструкция по эксплуатации

Страница: 7 / 156

Speaker Setup Guide
7
En
English
•
Front surround 3-spot setup
– This setup is ideal
when rear surround speaker placement isn't possible
or you want to avoid running long speaker cables in
your listening area. Use this setup together with the
Front Surround modes to take advantage of wall and
ceiling reflections for a very realistic surround effect.
1 Place the surround speakers on top of the front
speakers, turn the surround speakers towards the
closest wall, lining the arrows up for optimal Front
Surround.
Turn each surround speaker so that the arrow at the
base is lined up with the
FRONT SURROUND
arrow on
the front speaker. This is only necessary with the
FRTMOVIE
or
FRTMUSIC
modes. With
EXTPOWER
(Extra Power), the surround speakers should be in the
same direction as the front speakers (as shown below).
See
Using Front Surround on page 25 for more
informations.
2 Secure in position with the brackets provided.
Line up the holes in the bracket with the holes in the
speakers, then secure with two screws at the points
shown below. Make sure you’ve matched the right and
left brackets with the speakers (as shown).
• Please don’t use any attachments with the front
speakers other than the brackets provided.
3 Connect the speaker system.
Refer to Connecting up to connect the speakers properly.
4 Secure the speaker wire.
When you’re finished, thread the surround speaker cords
through the outlet on the back of the speaker stand and
through the base of the brackets as shown below.
Front
left
Receiver subwoofer
Front
right
Surround
left
Surround
right
Center
Listening position
EXTPOWER FRTMOVIE / FRTMUSIC
EXTPOWER FRTMOVIE / FRTMUSIC
Introduction.book Page 7 Wednesday, April 27, 2005 5:54 PM