Pioneer DVR-530H-AV, Инструкция по эксплуатации

Страница: 88 / 156

Recording
06
88
En
Recording from a DV camcorder
You can record from a DV camcorder connected to the
DV IN
jack on the front panel of this recorder. Using the
recorder’s remote, you can control both the camcorder
and this recorder.
Before recording, make sure that the audio input for the
DV IN
jack is setup (see DV Input on page 133).
Important
• The source signal must be DVC-SD format
• Some camcorders cannot be controlled using this
recorder’s remote.
• If you connect a second recorder using a DV cable,
you cannot control the second unit from this one.
• You can’t control this unit remotely from a
component connected to the DV IN jack.
• You can’t record date and time information from DV
cassette.
• During DV recording, if a part of the tape is blank, or
has copy-protected material on it, this recorder will
pause recording. Recording will restart automatically
when there is a recordable signal. However, if there is
more than 10 seconds of blank tape, this recorder will
stop recording and the camcorder should stop
(depending on the camcorder).
• For best results when recording from a DV
camcorder to this recorder, we recommend cueing
the camcorder to the place you want to start
recording from and setting the camcorder to play-
pause.
1 Make sure your digital camcorder is connected to
the front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 Set up the recorder.
• Use
REC MODE
to set the recording quality. See
Setting the picture quality/recording time on page 81
for detailed information.
• Make sure a recordable disc is loaded if you want to
record to DVD.
3 From the Initial Settings menu, check that the DV
audio input is setup as you require.
See DV Input on page 133 for more on this.
• Check also that the
Audio In
settings for
External
Audio and Bilingual Recording are as you want
them (see Audio In Settings on page 132).
4 Press HOME MENU, select ‘Copy’, then ‘DV
Record’ from the menu.
• DV recording only works when the digital camcorder
is in VTR mode with a tape loaded.
5 Select ‘Record to Hard Disk Drive’ or ‘Record to
DVD’ to record to the hard disk drive or a recordable
DVD respectively.
6 Find the place on the camcorder tape that you
want to start recording from.
For best results, pause playback at the point from which
you want to record.
VR mode Video mode HDD
VOLUME
+ –
MUTE
RECORDER RECEIVER
TOP MENU
RDS DISP SYSTEM
SETUP
DISPLAY TEST TONE
ST + ST –
TUNE +
TUNE –
RETURN
DISC NAVIGATOR DVD MENU
HOME
MENU
AUDIO
SURROUND ADVANCED SOUND TIMER REC
SUBTITLE ANGLE PLAY MODE
SHIFT
VIDEO INPUT
INFO
GUIDE
HDD DVD
FM/AM AUDIO INPUT
HELP
TV/DVD
TV DIRECT
REC
INPUT TV
ENTER
CLEAR
TV CONTROL
CHANNEL
VOLUME
REC
PREV NEXT STEP/SLOW
STOP REC
REC MODE
ONE TOUCH
COPY
CHANNEL
SKIP
CM
BACK
DVR-530H_EU.book Page 88 Friday, May 13, 2005 3:48 PM