Using the touch panel keys
8
7
6
1
3
4
5
2
1
Performs manual tuning
To tune manually, touch [
o
] or [
p
] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
To perform seek tuning, touch and hold [
o
]
or [
p
] for about one second and then re-
lease. The tuner will scan frequencies until a
broadcast strong enough for good reception
is found.
p
You can cancel seek tuning by touching
either [
o
] or [
p
] briefly.
p
If you keep holding [
o
] or [
p
], you
can skip broadcasting frequencies.
Seek tuning will start at the time you re-
lease the keys.
2
Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
p
The lower keys and the upper keys ap-
pear only when the preset channel is se-
lected.
3
Searches for an RDS station by PTY infor-
mation
=
For details, refer to
Searching for an RDS
station by PTY information
on page 76.
4
Recalls equaliser curves
=
For details, refer to
Using the equaliser
on page 152.
5
Displays the
“
Function
”
menu
=
For details, refer to
Using advanced func-
tions
on page 75.
6
Displays radio text screen
7
Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
=
For details of the operation, refer to
Switching between the AV operation
screen and the list screen
on page 70.
8
Selects an FM band
Tapping the key repeatedly switches between
the following FM bands:
FM1
,
FM2
, or
FM3
.
p
This function is convenient for preparing
different preset lists for each band.
Engb
73
Chapter
14
Using
the
radio
(
FM
)
Using the radio (
FM
)
