1 Display the
“
AV Sound Settings
”
screen.
=
For details, refer to
Displaying the screen for
AV sound settings
on page 151.
2 Touch [EQ].
3 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mising.
4 Touch [Customize].
5 Touch the frequency that you want to
adjust the level.
6 Touch [
a
] or [
b
] to adjust the level of
the equaliser band.
Each time you touch [
a
] or [
b
], the level of
the equaliser band increases or decreases.
Using the auto-adjusted equaliser
You can set the auto-adjusted equaliser to suit
the vehicle
’
s acoustics. To use this function,
the vehicle
’
s acoustics must be measured in
advance.
=
For details of the operations, refer to
Adjust-
ing the equaliser curve automatically (Auto
EQ)
on this page.
p
To manually adjust the equaliser curve, set
“
Auto EQ
”
to
“
Off
”
.
1 Display the
“
AV Sound Settings
”
screen.
=
For details, refer to
Displaying the screen for
AV sound settings
on page 151.
2 Touch [EQ].
3 Touch the key next to
“
Auto EQ
”
to
turn the auto-adjusted equaliser on or off.
4 Select the equaliser curve.
Adjusting the equaliser curve
automatically (Auto EQ)
By measuring the vehicle
’
s acoustics, the
equaliser curve can be adjusted automatically
to suit the interior of the vehicle.
WARNING
A loud tone (noise) may be emitted from the
speakers when measuring the vehicle
’
s acous-
tics. Never perform the Auto EQ measurement
while driving.
CAUTION
!
Thoroughly check the conditions before per-
forming Auto EQ, as the speakers may be da-
maged if this is performed under the following
conditions:
—
When the speakers are incorrectly con-
nected. (For example, when a rear speaker
is connected as a subwoofer output.)
—
When a speaker is connected to a power
amp delivering output higher than the
speaker
’
s maximum input power capabil-
ity.
!
If the microphone for acoustical measure-
ment (sold separately) is not placed in an ap-
propriate location, the measurement tone may
become loud and measurement may take a
long time, resulting in battery drainage. Be
sure to place the microphone in the specified
location.
Engb
154
Chapter
26
Customising preferences
