5 Touch the item you want.
6 Touch the POI you want.
The searched location appears on the map
screen.
=
For the subsequent operations, refer to
Set-
ting a route to your destination
on the next
page.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in
“
History
”
.
p
If no location is stored in Destination His-
tory, you cannot select [
History
]. (If you
perform a route calculation, you can select
[
History
].)
p
“
History
”
can store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
1 Display the
“
Destination Menu
”
screen.
=
For details of the operations, refer to
Screen
switching overview
on page 22.
2 Touch [History].
3 Touch the entry you want.
The searched location appears on the map
screen.
=
For the subsequent operations, refer to
Set-
ting a route to your destination
on the next
page.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
1 Display the
“
Destination Menu
”
screen.
=
For details of the operations, refer to
Screen
switching overview
on page 22.
2 Touch [Coordinates].
3 Touch [East] or [West], and then enter
the longitude.
To enter W 50°1
’
2.5
”
for example, touch
[
West
], [0], [5], [0], [0], [1], [0], [2], and [5].
4 Touch [North] or [South], and then
enter the latitude.
To enter N 5°1
’
2.5
”
for example, touch [
North
],
[0], [5], [0], [1], [0], [2], and [5].
5 Touch [OK].
The searched location appears on the map
screen.
=
For the subsequent operations, refer to
Set-
ting a route to your destination
on the next
page.
Engb
41
Chapter
06
Searc
hing
for
and
selecting
a
location
Searching for and selecting a location
