CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the handbrake before set-
ting your route.
p
Some information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided will be for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
The basic flow of creating
your route
1
Park your vehicle in a safe place, and
apply the handbrake.
2
Display the
“
Top Menu
”
screen.
3
Select the method of searching for your
destination.
=
For details, refer to
Searching for and select-
ing a location
on page 39.
4
Enter the information about your desti-
nation to calculate route.
5
Confirm the location on the map.
=
For details, refer to
Checking the location on
the map
on this page.
6
The navigation system calculates the
route to your destination, and then shows
the route on the map.
7
Check and decide the route.
=
For details, refer to
Checking the calculated
route
on this page.
8
Your navigation system sets the route
to your destination, and the map of your
surroundings appears.
9
After releasing the handbrake, drive in
accordance with navigation guidance.
Checking the location on
the map
After searching for the destination, the
“
Loca-
tion confirmation screen
”
appears.
Location confirmation screen
%
Touch [OK].
The destination is set, and then route calcula-
tion starts.
p
If you press
MODE
button during route cal-
culation, the calculation is cancelled and
the map display appears.
#
Touch [
Scroll
].
The map display changes to the scroll mode. You
can fine-tune the location in the scroll mode, and
then you can set the location as your destination
or do various operations.
#
Touch [
Waypoint
].
The location is added to the
“
Waypoints List
”
screen.
p
If a destination is not set, [
Waypoint
] is not
available.
Checking the calculated route
After the destination is set, route calculation
starts.
Setting a route to your destination
Engb
32
Chapter
06
