Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal. This setting is invalid for
the mute signal has been received from the
MUTE lead connected to the navigation unit.
(Even if this setting is [
Off
], the navigation sys-
tem will mute or attenuate the audio source
volume when the signal is output via MUTE
lead.)
%
Touch [Mute] on the
“
AV System Set-
tings
”
menu.
Each touch of [
Mute
] changes the settings as
follows:
!
Guide/Tel/VR
—
The volume is muted or at-
tenuated according to the following condi-
tions
—
When the navigation outputs the gui-
dance voice.
—
When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
—
When the voice recognition mode is ac-
tivated.
!
Tel/VR
—
The volume is muted or attenu-
ated according to the following conditions
—
When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
—
When the voice recognition mode is ac-
tivated.
!
Off
—
The volume does not change
p
Operation returns to normal when the cor-
respond action is ended.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
[
Mute
]. This setting is also effective for a mute
signal that has been received from the MUTE
lead connected to the navigation unit.
p
This menu is not available when AV source
is [
Off
].
%
Touch [Mute Level] on the
“
AV System
Settings
”
menu.
Each touch of [
Mute Level
] changes the set-
tings as follows:
!
20dB
—
The volume becomes 1/10
!
10dB
—
The volume becomes 1/3
!
All
—
The volume becomes 0
p
When you select [
All
], no audio adjust-
ments are possible during the sound is
turned off.
p
When you select [
20dB
] or [
10dB
], no audio
adjustments are possible during the sound
is attenuated.
p
Operation returns to normal when the cor-
respond action is ended.
p
Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Changing the voice output of
the navigation guidance
You can set the speaker to output the naviga-
tion guidance and phone voice, etc.
%
Touch [Guidance/Tel SP] on the
“
AV Sys-
tem Settings
”
menu.
Each touch of [
Guidance/Tel SP
] changes the
settings as follows:
!
L+R SP
—
Uses both the front right and left
speakers
!
Left SP
—
Uses only the front left speaker
!
Right SP
—
Uses only the front right speak-
er
Switching
Auto PI
seek
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
%
Touch [Auto PI] on the
“
AV System Set-
tings
”
menu.
=
For details, refer to
Displaying the
“
AV Sys-
tem Settings
”
menu
on page 129.
Touching [
Auto PI
] switches between [
On
]
and [
Off
].
Customising preferences
Engb
131
Chapter
29
Customising
pr
eferences