Pioneer AS-LX70, Руководство по эксплуатации

Страница: 161 / 182

The Initial Setup menu
15
161
En
Additional information about the TV system
settings
About the input line system
This recorder is compatible with PAL, SECAM, 3.58 NTSC
and PAL-60 TV systems. The Input Line System and Input
Colour System settings determine how the recorder
treats incoming video signals from an external input.
Please note the following points when changing the
input line system:
• If, when the Input Line System setting is changed, the
screen goes blank (due to incompatibility with your
TV), you can switch back by pressing and holding the
front panel

(Stop) button then pressing

(Play)
(also front panel) while the recorder is
stopped.
• When you switch the Input Line System setting the
Copy List is erased. If you switch the setting using the

(Stop) button and

(Play) buttons as described
above, there is no confirmation, so please use with
care.
• You can’t mix recordings of different TV line systems
on the same disc.
• When you change this setting, the Input Colour
System setting also changes (see below).
About NTSC on PAL TV
Depending on the Input Line System setting and the
NTSC on PAL TV setting, the signal format output when
the recorder is stopped varies as shown in the table
below.
About the input colour system
The available options of the Input Colour System setting
depend on the Input Line System setting. The table below
shows the different options available.
Input Line System NTSC on PAL TV
Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Input Line System
Built-in analog
tuner
External input
625 System Auto Auto
PAL PAL
SECAM SECAM
525 System n/a Auto
3.58 NTSC
PAL–60
02SDVRLX70D_EN.book 161 ページ ２００８年１０月９日 木曜日 午後４時３８分