Pioneer AS-LX70, Руководство по эксплуатации

Страница: 170 / 182

Additional information
16
170
En
On-screen displays
The table below shows a list of error messages that you may encounter when using the recorder and an explanation
of their meaning.
Message Explanation/Action
• Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the recorder
automatically initializes it.
• Incompatible region number. The disc loaded has an incompatible region number for the recorder
and so will not play.
• Cannot record any more titles.
• No more space for file management data. The disc control data limit has been reached, or the maximum
number of chapters and/or titles has been reached. Erase titles/
chapters or combine chapters.
• This disc cannot be recorded. Undo the
finalization.
The disc was finalized on a non-Pioneer DVD recorder. Undo the
finalization in order to recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization successfully.
• Could not undo finalization successfully.
• Could not successfully unlock the disc. The disc may be dirty or damaged. Take out the disc, clean it and
retry. If the error persists, use a new disc. If the error appears even
with a new disc, please ask your nearest Pioneer-authorized service
center or your dealer to carry out repairs.
• Incompatible or unreadable disc. The disc loaded is a playback-only disc type. This display may also
appear if the disc is dirty or damaged.
• Cannot record to a disc that is not CPRM
compatible.
• Cannot record this content using Video
mode recording.
• This video cannot be recorded to DVD+R/
+RW. The video source is copy-once protected. Use a VR mode DVD-R/-RW
disc with CPRM for recording.
• This content is copy protected. The video source is copy-protected and cannot be recorded.
• Incorrect CPRM information.
The recorder could not read the CPRM information. The recorder
may be damaged — please ask your nearest Pioneer-authorized
service center or your dealer to carry out repairs.
• Repairing disc.
• Repairing the HDD. During recording, the power was cut. This display appears when the
power is restored.
• Could not repair the disc. The recorder was unable to repair the disc after a power cut. The
contents of the recording will be lost.
• Overheating has stopped operation. Press
DISPLAY to clear message. The internal temperature of the recorder has exceeded the operating
limit. If this message reappears, please ask your nearest Pioneer-
authorized service center or your dealer to carry out repairs.
• HDD optimization is recommended. This can
be done using Disc Setup. The HDD should be optimized (basically, HDD housekeeping) to
maintain playback and recording performance.
• Please perform HDD optimization. This can
be done using Disc Setup. The HDD is in more urgent need of optimization in order to maintain
performance.
02SDVRLX70D_EN.book 170 ページ ２００８年１０月９日 木曜日 午後４時３８分