Pioneer AS-LX70, Руководство по эксплуатации

Страница: 46 / 182

HDMI Control
09
46
En
Before using synchronization
Once you have finished all connections and settings, you
must:
1 Put all components into standby mode.
2 Turn the power ON for all components, with the
power for the Flat Screen TV being turned on last.
3 Choose the HDMI input to which the TV is
connected to this unit, and see if video output from
connected components displays properly on the
screen or not.
Synchronized amp mode
Synchronized amp mode begins once you carry out an
operation for the Flat Screen TV. For more information,
see the operating instructions of your Flat Screen TV.
Synchronized amp mode operations
By connecting a component to this unit with an HDMI
cable you can use synchronized amp mode, which allows
you to synchronize the following operations:
• Displays on the Flat Screen TV when you mute or
adjust the volume of this unit.
• The input of this unit is automatically changed when
playback occurs on a connected component.
• Even if you change this unit’s input to a device that is
not connected by HDMI, the synchronized amp mode
remains in effect.
• By pressing GENRE when listening to a source from
a supplied HDD/DVD recorder, the most appropriate
listening mode is automatically selected (page 33).
Canceling synchronized amp mode
If you cancel synchronized amp mode while connected
via HDMI to a Flat Screen TV or while you are watching a
TV programme, the power for this unit is turned off.
01SX-SW70SW_EN.book 46 ページ ２００８年１０月９日 木曜日 午後４時３２分