Pioneer AS-LX70, Руководство по эксплуатации

Страница: 17 / 182

Controls and displays
03
17
En
NTSC
Lights when the video output signal format is NTSC.
(page 155)
Indicates which channels of a bilingual broadcast are
recorded.
VPS/PDC (page 98)
Lights when receiving a VPS/PDC broadcast during a
VPS/PDC-enabled timer recording.
5 Recording quality indicators (page 95)
XP
Lights when the recording mode is set to XP (high
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP/SLP
Lights when the recording mode is set to
LP
(long
play) or SLP (super-long play).
EP/SEP
Lights when the recording mode is set to EP
(extended play) or SEP (super-extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
6 Character display
7 R/RW
Lights when a recordable DVD-R or DVD-RW disc is
loaded.
8 PL (page 118)
Lights when a VR mode disc is loaded and the
recorder is in Play List mode.
V
Lights when an unfinalized Video mode disc is loaded.
Common Interface
To receive scrambled D.TV channels you will need a CA
module and smart card provided by your service provider.
Different CA modules support different encryption
systems. This recorder is designed to work with modules
that support the DVB standard. Contact your service
provider to obtain the right kind of CA module.
Note that neither CA modules nor smart cards are
supplied or sold by Pioneer.
Inserting a CA module
The Common Interface card slot is located on the inside
of the cover of the recorder’s front panel.
1 Push down on the PUSH OPEN tab to access the
Common Interface.
2 Insert the CA module into the card slot as far as
it will go.
The Common Interface card slot accepts Type I and Type
II PC Cards (PCMCIA cards).
01SX-SW70SW_EN.book 17 ページ ２００８年１０月９日 木曜日 午後４時３２分