8
DIGITAL VIDEO RECORDER
CONTROLS
Front Panel
Buttons
POWER button
y
Press this button to turn the power on; press again to turn the power off.
The POWER LED (red) lights/goes off when the power is on/off.
Numeric Buttons
(1~16)
y
These buttons have a number of functions to enter data and to make
selections. They are used to enter numerical data when prompted for the
password, to make channel/camera selection, to choose the day in
schedule option, and to enter alphabets to label each channel.
Mode Indicator
y
Five LEDs display the status of the Digital Video Recorder. From the left,
Power (red), Recording (red), Scheduled Recording (green), Lock (green)
and Network (green).
Playback / Record
Control
y
Used to Start and Stop Recording or Playback.
Shuttle Ring
y
Used to control the playback speed, and to rewind or forward the image.
JOG Dial
y
Used to forward or reverse the image during playback (field-by-field).
9
DIGITAL VIDEO RECORDER
Remote control
signal receiver.
y
Do not block the receiver as the remote controller needs the line of sight to
the receiver.
y
[DISPLAY] : Press this button to display the cameras in multi-screen mode
or to switch sequence function.
y
[ZOOM]: Press this button to display zoom area box; press [ENTER]
to enlarge the image. Pressing cursors can move this zoom area.
Screen Control
Buttons
y
[P/T/Z/FOCUS]: Press this button to control a PAN/TILT/ZOOM camera
via RS-485 connection.
y
[SCHEDULE]: Press this button to make scheduled recording standby.
The SCHEDULE LED (green) lights/goes off when the schedule is on/off.
y
[TIME SEARCH]: Press this button to display the Time Search menu.
y
[LOG] : Press this button to display log list.
Press this button to display the Alarm Search menu.
y
[REC] : Press this button to start recording.
Function Buttons
y
[SHUTTLE HOLD]: This button retains the selected playback or reverse
playback speed.
It is also used for controlling Spot out while it’s Live viewing.
y
[ENTER]: Press this button to save menu settings
y
[CANCEL]: Press this button to exit menu without saving.
y
[-, +] : To Decrease settings , To Increase settings
y
[Direction
STWX
]: In Menu setup mode, used to move the cursor.
In Zoom mode, used to move the zoom area.
MENU Button
y
[MENU]: Press this button to display the MAIN MENU screen.
y
[BACKUP]: Press this button to begin making a backup copy of the hard
drive.
If there is no peripheral recording device connected, this button cannot
be used.
Backup Button
y
[EXT. SEARCH]: Press this button to start external HDD search.
LOCK Button
y
Press this button to lock all units’ key buttons including the remote
controller. The LOCK LED (green) lights/goes off when the lock is on/off. To
release press it again and enter the administer password.