52
DIGITAL VIDEO RECORDER
Log List Search/ Alarm, Motion Search
The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１
.
To start Event Search, press
[Log]
button, then Log List Menu pops up, as
shown below.
MENU TAP
CONDITION
ALL
y
It has a list of all the events since the initial power on procedure of DVR
SYSTEM
y
It shows All Event except for Alarm, Motion, and Video Loss.
ALARM
y
It shows All Alarm List.
MOTION
y
It shows Motion List.
VIDEO LOSS
y
It shows Video Loss List.
2. Use Up/Down buttons [
TS
] to desired “Time” to playback. Use Left/Right buttons
[
WX
] to move NEXT page.
3. Press
[ENTER]
button to start playback.
<Note>
Log list is saved on HDD.
<Note>
To save log output, please connect USB memory stick into USB port on Front or
Rear. Then press Menu button on each category to backup Log data
53
DIGITAL VIDEO RECORDER
EXTERNAL SEARCH
This button allows searching for data from the external devices connected through the USB
ports and Built in CD-RW/DVD-RW.
1. Please connect to external HDD to USB port on Front or Rear.
(Insert a backup Media into Built-in CD/DVD.)
2. Press
[EXT. SEARCH]
button. Then External Search menu will appear.
3. Please select the device to search, then press [ENTER] button. Time search
Calendar Menu pops up, as shown below.
4. Following steps are discussed on “SEARCH”
<Note>
Do not try to search for failed backup CD.
