API CAN / RS232
Entwicklungshandbuch / Developer Manual PikoEval
Seite / Page 86 / 98
Version 8
D1CDOSA
Driver1 Current Duration Of Selected Activity
Driver 1 Current Duration Of Selected Activity shall indicates the current duration of the
selected activity, since selected.
The selected activity may be:
current driving period
current availability period
current rest period
current work period
This parameter shall provide:
data length: 2 byte
resolution:
1 min/bit gain, 0 min offset
operating range:
0 to 64255
D1CDTPACW
Driver1 Cumulated Driving Time Previous And
Current Week
Driver1 Cumulated Driving Time Previous And Current Week shall be computed as the
current accumulated driving times of driver 1 (driver), for the previous and the current
week, and shall provide:
data Length:
2 bytes
resolution:
1 min/bit gain, 0 min offset
operating range:
0 to 64255
D2I
Driver2 Identification
Driver 2 Identification shall be used to obtain the driver 2 identity from a driver card
inserted in the recording unit, and contain three (3) bytes for the issuing member state of
the driver card, and sixteen (16) bytes for the card number, see tachograph regulation,
appendix 1: Nation Alpha and Card Number format), and shall provide:
data length: 19 bytes ASCII
byte: 1 - 3 - issuing member state;
byte: 4 - 19 - card number;
D2CDT
Driver2 Continuous Driving Time
Driver 2 Continuous Driving Time shall be computed as the current accumulated driving
times of a particular driver, since the end of his last availability or break/rest or unknown
period of forty five (45) minutes or more. This period may be splitted in several periods of
15 minutes or more.
This parameter shall provide:
data length: 2 byte
resolution:
1 min/bit gain, 0 min offset
operating range:
0 to 64255
The computations involved take into account, as needed, past activities stored on the
driver card. When the driver has not inserted his card, the computations involved are
