Appendix
Entwicklungshandbuch / Developer Manual PikoEval
Seite / Page 96 / 98
Version 8
4.2.2
Pin Assignment CAN 1 (green) Standard unit
1
10
3
12
Figure 21: Pin Assignment CAN 1 Standard unit
Pin 1
Clamp 31 (ground)
Pin 6
CAN high (Tacho data + FMS-Data if available)
Pin 9
CAN low (Tacho data + FMS-Data if available)
Pin 10
Clamp 15 (24 V DC UBat - Ignition)
Pin 12
Clamp 30 (24 V DC)
Note: Please make sure that the power supply and the ignition signal is
wired and connected.
The connection to the FMS data is optional!