phone: +49 (3641) 66880 • fax: +49 (3641) 668866 • [email protected] • http://www.piezojena.com
Certification of piezosystem jena
2
This instruction manual includes important information for using piezo actuators. Please take time
and read this information. Piezo positioning systems are mechanical systems with highest precision.
Correct handling guarantees the precision over long time.
3 Declaration of Conformity
EU-Declaration of conformity
This certificate is issued for the following systems:
nano box USB
piezosystem jena GmbH
Pruessingstrasse 27
07745 Jena / Germany
The system as described above herewith complies with the requirements of the European
standards as follows:
EN 61010-1:2001
EN 61326-1:2006
EN 61326-1:2006
declaration issued by:
piezosystem jena GmbH
(General Manager)
Jena, Sept. 2011
4 Purchased Parts Package
Please check the completeness of the delivery after receiving the shipment:
·
voltage amplifier nano box USB
·
24V DC wide range power supply adapter
·
USB cable
The instruction manual and the USB driver can be downloaded from our website
www.piezojena.com
under
Downloads & Publications.
5 Instructions for Using Piezoelectric Elements and Power Supplies
·
The piezoelectric actuators from piezosystem jena are controlled by voltages up to 150V. These values
can be quite hazardously. Therefore read the installation instructions carefully and only authorized personal
should handle the power supply
.
·
After transportation, piezoelectric actuators should be allowed to adapt for approximately 2 hours to the
room temperature before being switched on.
·
Piezoelectric actuators are made from ceramic materials with and without metallic casings. This materials
are relatively brittle. This should be noted when handling piezoelectric actuators. All piezoelectric elements
are sensitive to bending or shock forces.
