piezosystemjena nano box USB, Инструкция по эксплуатации

Страница: 39 / 44

phone: +49 (3641) 66880 • fax: +49 (3641) 668866 • info@piezojena.com • http://www.piezojena.com
Appendix 36
Examples request: "rect,5.5,0,50,20,60"
response: "ok"
The rectangle function generator is initialized to:
Frequency: 5.5Hz
Amplitude: 50%
Offset: 20%
Duty cycle: 50%
back to command list
9.1.1.23.3 Command: tria
Command tria,frq,phase,amp,offs,duty
Description Set the parameters of the triangle function generator by storing them into the device's
EEPROM. A running or stopped triangle function generator is not affected.
Responses ok on success
nok on failure
Query sin
Description Get the parameters of the triangle function generator by retrieving them from the device's
EEPROM.
Responses tria,frq,phase,amp,offs,duty on success
nok on failure
Parameters Description Type: Range Default value
frq Frequency [Hz] FPV: 0.08 ... 50 10
phase Initial phase angle [°] (unused) FPV: 0 ... 360 0
amp Amplitude [%] FPV: 0 ... 100 100
offs Offset [%] FPV: 0 ... 100 0
duty Duty cycle [%] FPV: 0 ... 100 50
Errors error-bit 28, error-bit 29
Examples request: "tria,5.5,0,50,20,60"
response: "ok"
The sine function generator is initialized to:
Frequency: 5.5Hz
Amplitude: 50%
Offset: 20%
Duty cycle: 50%
back to command list
9.2 Status Double Word
The description of every status-bit in the status double word follows. The status-bit 00 is the least significant bit
and the status-bit 31 is the most significant bit
:
status-
bit
Name:
Description
00 Device ready:
If every voltage is within its tolerance range and a valid actuator has been recognized then the device
is ready. The state of the high voltage switch is ignored!