piezosystemjena nano box USB, Инструкция по эксплуатации

Страница: 35 / 44

phone: +49 (3641) 66880 • fax: +49 (3641) 668866 • info@piezojena.com • http://www.piezojena.com
Appendix 32
9.1.1.22.2 Command: tbpos
Command tbpos,idx,slew-rate,pos,duration
Description Set the parameters of a row of the table-driven generator by storing them into the device's
EEPROM. A running or stopped table-driven generator is not affected.
Responses ok on success
nok on failure
Query tbpos,idx
Description Get the parameters of a row of the table-driven generator by retrieving them from the device's
EEPROM.
Responses tbpos,idx,slew-rate,pos,duration on success
nok on failure
Parameters Description Type: Range Default value
idx Index of row W: 0 ... 99 none
slew-rate Slew rate [V/µs] FPV: 0.000000003 ... 0.005 0.005
pos Position or voltage [%] FPV: 0 ... 100 0
duration Duration [s] FPV: 0.1 ... 100 0.1
Errors error-bit 28, error-bit 29, error-bit 30, error-bit 31
Examples request: "tbpos,0,0.0003,50,50"
response: "ok"
back to command list
9.1.1.22.3 Command: tblo
Command tblo,limit
Description Set the lower limit of the row index of the table-driven generator. If the new lower limit is
greater than the index of the current row then the index of the current row is set to the new
lower limit. The limit is stored into the device's EEPROM. A running or stopped table-driven
generator is affected.
Responses ok on success
nok on failure
Query tblo
Description Get the lower limit of the row index of the table-driven generator by retrieving it from the
device's EEPROM.
Responses tblo,limit on success
nok on failure
Parameters Description Type: Range Default value
limit Lower limit of the row index W: 0 ... 99 0
Errors error-bit 28, error-bit 29, error-bit 31
Examples request: "tblo,20"
response: "ok"