118
118
118
118
Select a measurement function and enclose it in quotes in the command string
(FUNC “VOLT:DC”). Use one of the following strings.
VOLTage:DC
VOLTage:AC
VOLTage:DC:RATio
CURRent:DC
CURRent:AC CAPacitance
RESistance (for 2-wire ohms)
FRESistance (for 4-wire ohms)
FREQuency
PERiod
CONTinuity
DIODe TCOuple TEMPerature
[SENSe:]FUNCtion?
Query the measurement function and return a quoted string.
[SENSe]:FUNCtion[1/2] "<function>"
Sets DMM to the measurement function listed in the function parameter.
The function must be enclosed in quotes in the command string (FUNC
“VOLT:DC”) for Example. In addition, Parameters [1/2] means that use 1
for primary display, and 2 for secondary display. The followings are the
valid commands.
※
Note: Using FUNC without a 1 or 2 will default to 1 for the primary
display.
[SENSe:] FUNCtion[1/2] “CAPacitance”
[SENSe:] FUNCtion[1/2] “CONTinuity”
[SENSe:] FUNCtion[1/2] “CURRent:AC”
[SENSe:] FUNCtion[1/2] “CURRent:DC”
[SENSe:] FUNCtion[1/2] “DIODe”
[SENSe:] FUNCtion[1/2] “FRESistance”
[SENSe:] FUNCtion[1/2] “FREQuency”
[SENSe:] FUNCtion[1/2] “PERiod”
[SENSe:] FUNCtion[1/2] “RESistance”
[SENSe:] FUNCtion[1/2] “TEMPerature:FRTD”
[SENSe:] FUNCtion[1/2] “TEMPerature:RTD”
[SENSe:] FUNCtion[1/2] “VOLTage:DC”
[SENSe:] FUNCtion[1/2] “VOLTage:AC”
[SENSe:] FUNCtion[1/2] ?
(
※
Note: Query measurement function
)
[SENSe:] FUNCtion2 “None”
(
※
Note: Turn off secondary display and it’s
valid only when used with FUNC2.)
