PIAGGIO 2005 XEVO 400ie, Руководство по ремонту

Страница: 279 / 376

- Remove the central and the right spacer.
- To refit, follow the removal operations but in re-
verse order, being careful to observe the original
torque and to lubricate the sliding area « A » of the
right spacer on the engine bearing.
Locking torques (N*m)
Engine - chassis fixing pin
100 - 120
Two types of engine fixing pins, without distinction, have been fitted on the scooter:
- 17-mm flanged-head pin.
- 22-mm head pin and washer.
Shock absorbers
Removal
Proceed as follows:
- place the vehicle on its centre stand;
- lift the engine a little with a jack so as to free the
two shock absorbers;
- remove the muffler
- undo the shock absorber spring assembly clamp-
ing screw from the support fixed to the engine on
the one side and from that fixed to the muffler on
the other;
- unscrew the two upper nuts (one on each side)
fixing the shock absorber spring assembly to the
frame and remove the shock absorbers.
XEVO 400ie
Suspensions
SUSP - 279