PIAGGIO 2005 XEVO 400ie, Руководство по ремонту

Страница: 217 / 376

Checking master-box data
Connect the diagnostic tester.
Set to « ON » and select the immobilizer function.
Scroll the pages the find the data.
Specific tooling
020680Y Diagnosis Tool
The information will be as follows:
- Unprogrammed control unit « OFF »
- Start-up disabled « OFF »
- Number of keys 2*
*The number denotes how many keys have been used for programming, master key included.
Resetting the circuit
1 Replacing the small cylinder
- Remove the original master key transponder and install it on the master key of the new cylinder.
- Program the system again as described above.
2 Decoder replacement
When the decoder is replaced it is necessary to program the system again.
Programming is indispensable for the engine start-up. (see System programming).
3 Control unit replacement
Programming is indispensable when the control unit is replaced to enable the engine start-up.
In this case it is sufficient to switch to " ON " using the master key.
N.B.
- THE SERVICE KEY (BLACK-COLOURED) IS NOT USED FOR PROGRAMMING.
- WHEN NOT PROGRAMMED, THE CONTROL UNIT ALLOWS NO FUNCTIONAL DIAGNOSIS ON
THE ENGINE.
4 Replacing or duplicating service keys
Keys can be duplicated using the blank keys and
the original master key.
A copy may also be requested using the scooter
CODE CARD.
Program the system again using the master key
and all service keys (see System programming).
N.B.
XEVO 400ie
Injection
INJEC - 217