phytron IXEa-A Series, Руководство пользователя

Страница: 14 / 40

User Manual IXE
α−
A
MA 1206-A001 GB
12
2.1.1 Cursor Control Keys
These keys shift the cursor one character to the left or to the right
These keys shift the cursor one line up (to line n-1) or down (to line
n+1)
Delete character
Insert character
Delete line
Insert line
2.2 Monitor Mode
After unit POWER ON, the display indicates the: Monitor mode.
From the Monitor mode all other operating modes can be accessed:
Instruction: Type the instruction corresponding to the desired operating mode and confirm
with .
The list of operating modes is given in chapter 2.2.1.
Example: H calls the Manual mode
To modify the operating mode again:
1. Switch back to the Monitor mode:
These keys must be pressed simultaneously!
2. Select the new operating mode (as above)
If an automatic start has been programmed (refer to the list of program instructions), the
corresponding instruction will be automatically executed after a program interruption or
after a hardware reset.
The automatic start can be suppressed by pressing the key for 5 seconds when the
unit is powered on.
In this case, the IXE
α
-A-T unit starts again in the monitor mode.