phytron IXEa-A Series, Руководство пользователя

Страница: 13 / 40

phytron
®
MA 1206-A001 GB 11
2.1 Keyboard Assignment / Functions
•
After POWER ON, the lower characters and signs of the keys are activated.
•
Upper sign: press together with the corresponding key.
•
key: Change from capitals to normal characters
All instructions, aside from certain exceptions, are introduced in capitals, for example
: 'IS'.
Example of an exception: 'd0', all exceptions are marked on the keyboard.
key ( Manual mode ) :
Switching the run frequency f/f' (f
min
/f
max
) in the Manual mode
f(f
min
) : press only the key
f'(f
max
) : press the keys +
If the cursor is not visible in the Manual mode , the key can be used only to switch the
run frequency.
The actual run frequency is displayed by = f (f
min
) or by
f' (f
max
).
After pressing the instruction displayed is executed. Error messages, such as 'program
not found' are also acknowledged by means of .
key switches the unit back to the monitor mode, without executing the instruction. The
cursor disappears.
Key I:
In the Manual mode , key I is used to switch from the program functions to the input of
alphanumerical characters. The cursor switches to the first position of the second display
line. You may then type a message or comment concerning the instructions on the 1st
display line. In this mode it is possible to modify the run frequency by means of the
key. This key is used only to switch from normal characters to capitals.