Physio Control LIFEPAK 20, Руководство пользователя

Страница: 79 / 227

Therapy
4-6 LIFEPAK 20e Defibrillator/Monitor Operating Instructions
The LIFEPAK 20e defibrillator/monitor can be setup to display the ECG waveform in AED mode
or to not display a waveform. The operation in AED mode remains the same whether or not the
ECG waveform is displayed.
When the CPR metronome is set to
ON
in the setup options (refer to Section 8 ), the CPR
metronome icon is displayed and the metronome sounds automatically during CPR times.
You cannot enable or disable the CPR metronome while in AED mode. Refer to "CPR
Metronome," page 4-17 , for more information.
AED Procedure
The following descriptions of voice prompts and messages are based on the factory default
settings for AED mode. The default settings are consistent with 2010 American Heart
Association (AHA) and European Resuscitation Council (ERC) guidelines. Changing the setup
options may result in different AED behavior. Refer to
Section 8 for setup option choices.
1 Verify that the patient is in cardiopulmonary arrest (unresponsive, not breathing normally, and
showing no signs of circulation.)
2 Press
ON
.
When the ECG waveform is set to
ON
in
the setup options (refer to Section 8 ), the
ECG appears with all of the AED
messages and prompts, as shown in the
screen to the left.
When the ECG waveform is set to
OFF
in
the setup options, the messages and
prompts fill the screen as shown in the
screen to the left.