Photon Focus MV1-R1280-50-G2 Camera Series, Руководство пользователя

Страница: 36 / 95

5 Functionality
AcquisitionMode TriggerMode After the command AcquisitionStart is executed:
Continuous Off Camera is in free-running mode. Acquisition can be
stopped by executing
AcquisitionStop command.
Continuous On Camera is ready to accept triggers according to the
TriggerSource
property. Acquisition and trigger
acceptance can be stopped by executing
AcquisitionStop command.
SingleFrame Off Camera acquires one frame and acquisition stops.
SingleFrame On Camera is ready to accept one trigger according to
the
TriggerSource
property. Acquisition and trigger
acceptance is stopped after one trigger has been
accepted.
MultiFrame Off Camera acquires n=
AcquisitionFrameCount
frames
and acquisition stops.
MultiFrame On Camera is ready to accept n=
AcquisitionFrameCount
triggers according to the
TriggerSource
property.
Acquisition and trigger acceptance is stopped after
n triggers have been accepted.
SingleFrameRecording Off Camera saves one image on the on-board memory
of the IP engine.
SingleFrameRecording On Camera is ready to accept one trigger according to
the
TriggerSource
property. Trigger acceptance is
stopped after one trigger has been accepted and
image is saved on the on-board memory of the IP
engine.
SingleFrameReadout don’t care One image is acquired from the IP engine’s
on-board memory. The image must have been
saved in the
SingleFrameRecording mode.
ContinuousRecording Off Camera saves images on the on-board memory of
the IP engine until the memory is full.
ContinuousRecording On Camera is ready to accept triggers according to the
TriggerSource property. Images are saved on the
on-board memory of the IP engine until the
memory is full. The available memory is 24 MB.
ContinousReadout don’t care All Images that have been previously saved by the
ContinuousRecording mode are acquired from the IP
engine’s on-board memory.
Table 5.2: AcquisitionMode and Trigger
36