54
■
Memory Setup:
In this subtab, you are able to create titles
for the six memory setups that you have on your PC. By
clicking with the left mouse button in the text boxes, you are
able to edit the titles. At the bottom af the table, you can
select which default setting your PC will start with when
running the
System4
Multiplexer GUI.
3.5
Status Bar
The
Status
bar gives you information on your present state while working in the
System4
Configure.
Status Bar
■
To the left of the status line, hints will appear as a guide through the
System4
Configure
. For example, if your mouse pointer is
presently over the
Go On-line
shortcut button, the status bar will read "
Attempt to go On-line
."
■
To the right, over the status bar, is a rectangle that gives the status of whether or not you are currently on-line or off-line. If you are
off-line, the rectangle will be red with
Offline
in bold letters. If you are on-line, the rectangle will be green with
Online
in bold letters.
■
To the right of this are six buttons which each represent the six memory settings of multiplexer. When an asterisk * appears in
the square and that button is pressed down, that is the memory setting that you are currently modifying. In the above
illustration, memory setting #1 is currently active. Whenever a square becomes yellow in color, this indicates a change in that
particular memory setting, and the information from the table for that setting needs to be downloaded to the multiplexer. Once
that memory setting is downloaded, the box will return back to gray in color.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
C
ONFIGURATION
Memory Setup Table
