66
4.7.2
Display Mode for a Simplex System4
Shown is a cameo display for a Simplex model multiplexer for the
Monitor B application.
4.7.3
Action and Alarm Control (Duplex System4 Models
Only)
Like in the Monitor A application, action and alarm control can be controlled from the
System4
Monitor application
. For each
camera input on the multiplexer, there is an alarm input and action that can be set up for each camera. These lists are set up in the
System4
Configure application
under the
Action Table and Alarm Table
.
If one or both of these lists are set up in the
System4
Configure
application
and an alarm or action occurs in one of your cameras, the
PC will begin to beep and the camera in alarm or action will display that
state in the
Cameras In System
display.
■
You can manually clear actions/alarms by selecting the corresponding
camera in the drop down box and clicking on either the
Action Clear
or
Alarm Clear
buttons with your mouse.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
M
ONITOR
A
PPLICATIONS
Cameo Display
List Box Display with Alarm and Action
Alarm/Action Clear